|
Care
Instructions for your Green Lizard
Australia® Boots
Its
always best to treat sheepskin footwear with a good Rain and
Stain Repellent prior to wearing to avoid any initial
staining. Please strictly follow the below instructions to
avoid any damage during the water and stain repellent
process.
Sheepskin
"Rain and Stain" Repellents are safe for sheepskin
when used as directed.
1.
Sheepskin should be dry and clean.
2.
Apply outdoors or in a well ventilated area. Hold container
6 inches from sheepskin boot and spray in a back-and-forth
motion thoroughly and evenly, including all seams. Do NOT
saturate.
3.
For best results, let dry 24 hours before wearing.
During wet weather, use more frequently.
Please note that when properly used, a good Rain & Stain
Repellent will help to prevent, remove, and reduce stains.
Like
any fine garment, sheepskin is delicate and not all stains
can be prevented or removed. With proper care and cleaning,
you can expect your footwear to last longer, but we in no
way guarantee that it will remove all stains nor prevent
stains from occurring
How
to use Sheepskin Cleaner and Conditioner (Sheepskin Shampoo)
1.
Mix one capful of Sheepskin Shampoo per one gallon of warm
water.
2.
Immerse the boots completely in the water, and soak for 2-3
minutes to clean the inside and outside of the boot.
Important: Hand-wash only. NEVER
machine wash sheepskin footwear.
3.
Gently squeeze the entire boot to thoroughly distribute the
shampoo throughout the material.
4.
Thoroughly rinse in warm water.
5.
Pat dry with a towel to remove excess water, and allow to
dry naturally away from heat and direct sunlight. When
dry, brush the surface of the boot with a soft brush.
For
best results, use a sheepskin Rain & Stain Repellent
after each cleaning to prolong the life of your sheepskin
products.
If
you have any questions on how to care for your luxury,
sheepskin footwear, please contact
us
For
best results, use Sheepskin Water & Stain Repellent
after each cleaning to prolong the life of your sheepskin
products.
|
